Lines on page in copier printer scanners are caused 99% of the time by one of three things: ADF (automatic document feeder) dirty, bad drum or fuser assembly. As an end user the one thing you can resolve 99.9% of the time yourself if the cleaning of the copier printer scanner ADF glass.
Debris on the Automatic Document Feeder (ADF) glass can cause lines or streaks when copying using the ADF. Simple copier printer scanner maintenance of the scanner glass is simple for most models. Fist, do not confuse the large flat glass on your copier printer scanner as the ADF Glass. Each of these products utilize a separate piece of glass (ADF glass) when making copies or scans thru the ADF.
Debris can adhere to the thin long prinrer scanner copier adf scanner flass, which produces a line or streak on copies from the bottom to the top of the page. The debris can be Wite Out®, adhesive residue from a Post It® note, ink or paper dust. A soft lint free cloth moistened with water will usually be sufficient to clean debris. If needed, lens cleaner or glass cleaner can be applied to the cloth. this is a simple printer copier repair maintenance procedure.
The copier printer scanner scanner glass is usually about .5 to 1″ wide and9″ to 12″ long. On most models for copier printer scanners your scanner adf glass is located either BEFORE the large flat bed glass (to the right on most machines) or in the ADF section. Most adf sections can be hinged up so you can access the scanner glass. When you do the copier printer scanner repair maintenance on the adf glass use water or a glass cleaner. However, be careful not to use too much liquid!
The post copier printer scanner lines on page repair maintenance appeared first on Printer Fax Repair Tips.